Menu
The Mackworth floor hoist range is designed to provide a wide range of lifting options and ensure the safety of both client and carer.
The Mackworth M400 floor lift
The Mackworth M400 floor lift is designed and manufactured using high quality components to provide years of reliable service.
The M-Series floor lifts boast an impressive 400lb (180kg) lifting capacity, a leg opening angle of 16 degrees or 43.31″ (110cm), and market leading Linak® actuators and motors.
With its manually or electrically operated leg opening, the M-Series floor lift allows easy access to wider riser reclining chairs, large wheelchairs or even tight bed spaces. The product can be easily and compactly stored when not in use and has the ability to be folded on its end, utilizing small spaces effectively.
Made from the finest steel, this amazing lifting technology is manufactured using the very best welding and laser guided cutting procedures.
User weight limit (max rated load)
400lb (180kg)
Frame construction material
Steel
Total weight (unboxed)
86lb (39kg)
Lifting range (floor to carry bar center)
12.8-70.1″ (325-1780mm)
Leg opening range (internal)
20.1-37.4″ (510-950mm)
Leg opening range (external)
26.8-42.7″ (680-1085mm)
Front castors
4″ (100mm)
Rear braked castors
4″ (100mm)
Hand Control
Linak®
Actuator power
2250lbf (10,000N)
The Mackworth SA400 Stand Aid
The Mackworth SA400 has an impressive range of features to provide a safe and dignified lift.
The SA400 stand aid is uniquely designed to perform 3 key functions:
• a transfer
• a sit to stand
• an aid to rehabilitation through assisted standing
The Mackworth SA400 Stand Aid provides exceptional lifting abilities due to its two attachment points on the spreader bar.
When using the lift as a standing aid, the carer can choose either attachment point, to suit the height and the abilities of the person being raised. This gives the ability to lift a wide range of people from 4ft–6ft 5″ (1.2-1.95m). It can also give two lifting angles; one leaning back, the other “head over heels” (a more natural standing procedure for those with lower body strength).
The Mackworth SA400 is the ideal solution for rehabilitation programs. When physiotherapists are working in the early stages of rehabilitation, the standing support straps help support the client once in an upright standing position.
User weight limit (max rated load)
400lb (180kg)
Frame construction material
Steel
The Mackworth Essentials 400 Floor Lift
The Mackworth Essentials 400 Floor Lift represents real value for money in its class.
The lift boasts an impressive 400lb (180kg) lifting capacity, powered leg opening, and market leading Linak® actuators and motors.
The reduction in cost is achieved by only including “essential” components and features, to reduce manufacturing complexity without compromising on quality.
The Mackworth Essentials floor lift benefits from the same rigorous ergonomic design procedures and quality checks as our other trusted Mackworth products, and are constructed from high quality powder-coated steel that will provide years of reliable service.
User weight limit (max rated load)
400lb (180kg)
Frame construction material
Steel
Total weight (unboxed)
87.74lb (39.8kg)
Lifting range (floor to carry bar)
15.04″-68.50″ (382-1740mm)
Leg opening range
23.66″-46.30″ (601-1176mm)
Turning circle
48.82″ (1240mm)
Front castors
3″ (75mm)
Rear braked castors
4″ (100mm)
Hand Control
Linak JumboCare
Lift Actuator
Linak LA40
Leg Actuator
Linak LA23
The Mackworth TA400 Transfer Aid
The TA400 stand aid is easy to use, with opening legs to navigate chairs and obstacles, and braked rear casters to keep the unit stable while the patient raises themselves from a seated position.
Once in the raised position, the rear seat pads are moved into place to prevent falls and the patient can then be transferred between beds, chairs and toilets etc. without the need for a wheelchair.
Perfect for use with clients who have some mobility, but need that little bit of extra help due to reduced leg strength or balance.
User weight limit (max rated load)
400lb (180kg)
Frame construction material
Steel
Total weight (unboxed)
84lb (38.1kg)
Overall Width
26.8″ (680.72mm)
Overall Height
39.4″ (1000.76mm)
Leg opening range
35-41.3″ (889-1049.02mm)
Turning circle
39.8″ (1010.92mm)
Front castors
4″
Rear braked castors
4″
